The Stero SD3 is a pass-through dishwasher with several options for operation. It can employ either hot water or chemical sanitizing (i.e., high temp or low temp), and straight or corner orientation. With hot water sanitizing, this unit can wash 58 racks per hour, and using chemical sanitizing, up to 65 racks per hour.

This model has timed wash cycles for 1, 2, or 4 minutes, digital control status, error notification, and door-actuated start. It is constructed of stainless steel, and includes an exhaust fan control and booster activation. It is NL listed, NSF certified, and Energy Star certified. Stero is a Hobart brand and so is backed by their quality, warranty, and service.

Please note that the SD3 does not come with pre-installed chemical pumps. If you would like them for this dishwasher you will need to get them supplied and installed yourself.

Features

Chemical or hot water sanitizing
0.85 gallons per rack
58-65 racks per hour
Stainless steel construction
Adjustable from straight to corner operation
1, 2, or 4 minute timed wash cycles
Digital control status
180° final rinse assurance
Automatic tank fill
Door actuated start
Automatic drain closure
Exhaust fan control and booster activation included
Pressure gauge
UL listed, NSF certified, Energy Star certified

Specs

Model	SD3	SD3
Sanitizing	Hot Water Sanitizing	Chemical Sanitizing
Dimensions (WDH)	24.5" x 26" x 57.25"	24.5" x 26" x 57.25"
Racks per hour	58	65
Wash Motor H.P.	2	2
Electric Heating Unit	5kW	5kW
Rate of Rinse Flow	5.1 gal/min	5.1 gal/min
Peak Rate of Drain Flow	14 gal/min	14 gal/min
Incoming Water Temp Required	110° F minimum	140° F minimum
Weight	270 lb	270 lb

Stero SD3 - 65 Racks/Hour Pass Though Dishwasher - 208-480v

Electrical: 1 phase

Booster Heater: With Booster Heater